Price: $99.99
(as of Nov 24,2019 06:40:55 UTC – Details)
Product Description
Q: How to ensure the stability and safety of the door?
2 * Door Stoppers: Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close.
1 * Floor Guide: A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.
2 * Anti-jumpers- those little round discs- go on top of the door and won’t allow door to be lifted off rail unless they’re turned.
Q: When do you need a headboard?
a. If the studs don’t line up with the pre-drilled holes in the rail.
b. If there is a doorway trim.
And “door depth” plus “trim depth” is greater than 2”
Q: How much space do I need above the doorway?
A: You will need a minimum of 6″ from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.
Q: How thick of a door will this kit work with?
A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8″ to 1 3/4″, but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below:
2”- door depth – trim depth
If your answer is 0 or greater, then you’re fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board.
Brand:
SMARTSTANDARD
SMARTSTANDARD
Suitable Track Length (ft):
8
8
Color:
Natural
Natural
Material:
Natural Wood
Natural Wood
Weight (lbs):
57
66
Size:
42” x 84”
48” x 84”
Door Panel Thickness:
1-3/8″
1-3/8″
WHY CHOOSE US: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit is provided along with a completely turnkey experience.
SIMPLE AND EASY TO INSTALL: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team.
PACKAGE INCLUDED: A Barn Door Hardware Kit(1x 8FT rail, 6x Rail Spacers, 2x Rollers, 2x Door Stops, 2x End Caps, 1x Floor Guide, 1x Hex Key,1x Door Handle, all other necessary hardware is included as you see in the pictures. For 16 inch stud.) Door Not Included.
DOOR WEIGHT CAPACITY: 220 lbs, Fit door panel Width: 42″-48″, Fit door panel thickness: 1 3/8″ and 1 3/4″.
THE BEST CHOICE FOR YOUR HOUSE: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.