(as of Nov 17,2019 10:59:02 UTC – Details)
Q: How to ensure the stability and safety of the door?
2 * Door Stoppers: Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close.
1 * Floor Guide: A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.
2 * Anti-jumpers- those little round discs- go on top of the door and won’t allow door to be lifted off rail unless they’re turned.
Q: When do you need a headboard?
a. If the studs don’t line up with the pre-drilled holes in the rail.
b. If there is a doorway trim.
And “door depth” plus “trim depth” is greater than 2”
Q: How much space do I need above the doorway?
A: You will need a minimum of 5″ from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly.
Q: How thick of a door will this kit work with?
A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8″ to 1 3/4″, but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below:
2”- door depth – trim depth
If your answer is 0 or greater, then you’re fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board.
Suitable Track Length (ft):
36” x 84”
Door Panel Thickness:
WHY CHOOSE US: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit are provided along with a completely turnkey experience.
SIMPLE AND EASY TO INSTALL: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a Carpenter or decoration team.
PACKAGE INCLUDED: A Barn Door Hardware Kit (2x 3FT Rail,5x Rail Spacers,2x Rollers,2x Door Stops,2x End Caps,1x Floor Guide,1x Hex Key;All other necessary hardware is included as you see in the pictures. For 16 inch stud.) DOOR NOT INCLUDED.
DOOR WEIGHT CAPACITY: 220 lb; fit door panel Width: 36″; fit door panel thickness: 1 3/8 inch and 1 3/4 inch.
THE BEST CHOICE FOR YOUR HOUSE: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.